Lunar RTLS/GBT S-Band Radar Map at Level 2 (SRADL2)

SRADL2 – S-Band Radar Map at Level 2

PDS Data Set ID: ARCB/NRAO-L-RTLS/GBT-5-12.6CM-V1.0DOI: 10.17189/1519462

For more information about RTLS-GBT SRADL2 products, see the Data Set Catalog File and “Earth-Based 12.6-cm Wavelength Radar Mapping of the Moon: New Views of Impact Melt Distribution and Mare Physical Properties”.

The Arecibo Radio Telescope (RTLS) and the NRAO’s Robert C. Byrd Green Bank Telescope (GBT) Level 2 S-band Radar Map (SRADL2) data products contain dual-polarization calibrated radar maps for regions on the near side of the moon collected at a wavelength of 12.6 cm, using the 305 m RTLS to transmit and the 105 m GBT to receive.

There are five image files for each region mapped during a typical 29-minute radar integration period: a same-sense circular polarization map (SCP), an opposite-sense circular polarization map (OCP), a map of beam angle in radians (ANG), a map of incidence angle in radians (INC), and a circular polarization ratio image (CPR). North is at the top of the frame in all these images.

For the polarized (OCP) and depolarized (SCP) maps, the floating point values represent the estimated dimensionless backscatter coefficient (often called sigma-zero) of the lunar surface at a radar wavelength of 12.6 cm (2380 MHz frequency). Polarized refers to energy scattered from the lunar surface in the opposite circular polarization sense to that transmitted (the behavior expected of a flat, mirror-like, reflecting surface). Depolarized refers to reflected energy with the same sense of circular polarization (the behavior expected from a surface with abundant wavelength-scale objects that randomize the reflected polarization). The OCP and SCP images are further normalized to the cosine of the radar incidence angle for a reference sphere (given in the INC files) at each location.

The ANG and INC image files display the beam angle and incidence angle, respectively, in radians for each pixel. These co-registered maps, in floating point format, will allow a user to reverse the applied calibration steps if desired. The beam angle value for each pixel represents the angle (in radians) between a vector from the observer to the surface location and the vector from the observer to the radar pointing target given for each map. The incidence angle value for each pixel represents the angle (in radians) between a vector from the Moon’s center of mass (COM) to the surface location and the vector from the COM that passes through the sub-radar point. Values near the radar-visible limb of the Moon thus approach 90 degrees.

The CPR image files are circular polarization ratio images formed by averaging pixels over a 5x5 moving window, and dividing the averaged SCP data by the averaged OCP data. No other normalization is performed, so the polarization ratio images have a strong decrease toward the center of the Moon (lower incidence angle). Values of unity and greater are typical of rough surfaces, particularly at high incidence angles where the diffuse scattering component dominates the echo.

RTLS/GBT SRADL2 products have the following file names:

SBAND_aadooo_ttt.IMG (with detached PDS label)

where:

aa = 2-digit center latitude

d = North or South latitude (N or S)

ooo = 3-digit East longitude

ttt = image file type

SCP = same-sense circular polarization map

OCP = opposite-sense circular polarization map

ANG = map of beam angle in radians

INC = map of incidence angle in radians

CPR = circular polarization ratio image

In ODE, SRADL2 products have the following product IDs:

SBAND_AADOOO_TTT